Huawei HG659 Fibre Broadband Setup

Huawei HG659 Fibre Broadband Setup

To set up your modem, simply open a web browser on your computer and type the default gateway address 192.168.1.1 in the address bar.


Default username - Admin

Default password - Should be written on the back of the router.  or @last 8 characters of serial number. (@XXXXXXXX)

Or for few models,

Default username - !!Huawei

Default password - @HuaweiHgw 

  1. Click Internet from the top menu
  2. Click “Internet Settings” from the left menu
  3. Locate and select your connection type
  4. Internet connection: Internet_Ethernet
  5. Click “Edit
















Ensure the following settings are changed:

1. Enable Connection: Ticked

2. Service Type: tick Internet (TR069 and Voice not ticked)

3. Connection Type: IP Routing (IP)

4. MRU: 1500

5. MSS: 0

6. NAT Type: NAPT

7. Enable VLAN: Ticked

8. VLAN ID: 10

9. 802.1p: 0

10. IP Protocol Version: IPV4

11. IPV4 addressing type: DHCP

12. Static DNS: Unticked

13. Click: Save



    • Related Articles

    • Mikrotik Router Configuration

      Mikrotik routers are recommended for use with Tech Connections's Broadband service and they are very simple to setup. Tech Connections do NOT use PPP for connections to our network. You simply need to enable DHCP on the WAN interface and use VLAN 10 ...

    • Set Up TP Link TL-MR6400 to work with Tech Connections Fibre

      This guide will help you set up the TP-LINK TL-MR6400 to work on our Fibre Connections and if you have Simcard in your router this will also act as a backup to the main connection. To login to TP-LINK TL-MR6400 Router, Open your web browser and type ...

    • Fixed Wireless Access

      4G FIXED WIRELESS We recommend customers install fibre broadband wherever this is available. However, it is often the case that fibre connectivity is unavailable at an address or installation is delayed or the customer requires a non-fibre connection ...

    • Huawei HG659 Router VOIP Port Provisioning

      The Huawei HG659 Router has a built-in VOIP port that can be configured to work with Tech Connections. The following guide explains how to configure a Tech Connections phone number on Phone Port on the router. 1. Configure your VOIP settings in the ...

    • Gigaset Cordless IP Phones - Manual Configuration

      Configuring the phone via the Web configurator We recommend using the base stations web user interface to configure each handset. Establish the telephone’s current IP address on the handset Control button on right side of handset Settings (spanner ...